Steelite Electric Pressure Washers
Recalled by Longer Technology (Hong Kong) Limited, dba Longer 3D, of China
Consumer product recall
An electric shock hazard means the product can expose users to electrical current during normal use. These recalls are issued to prevent shock and electrocution injuries, and consumers are generally told to unplug and stop using the product.
Longer Technology (Hong Kong) Limited, dba Longer 3D, of China has recalled Steelite Electric Pressure Washers, according to the U.S. Consumer Product Safety Commission (CPSC). The recall was announced on August 27, 2026. It involves an electric shock hazard.
Below is a plain-English summary of what was recalled, why it was recalled, how to tell whether you have the affected product, and what steps you can take. For the complete and most current details, you can view the CPSC record linked further down this page.
What was recalled?
This recall covers Steelite Electric Pressure Washers, with approximately About 128 affected. The company behind the recall is Longer Technology (Hong Kong) Limited, dba Longer 3D, of China.
From the official recall notice: “This recall involves Steelite-branded pressure washers. They are red and black and measure about 30 inches high, 10 inches wide and 12 inches deep. The 2.5 gpm, electric pressure washers have a foam cannon, four quick connect nozzles and a 20-foot hose. Model “AZ6041VC” is printed on a label on the back of the pressure washer.”
Why was Steelite Electric Pressure Washers recalled?
According to the CPSC, the hazard is described as follows: “The recalled pressure washers lack an integral ground-fault circuit-interrupter (GFCI) and an adequate-length power cord, posing a risk of serious injury or death from shock and electrocution hazards.” In plain terms, this recall relates to an electric shock hazard.
An electric shock hazard means the product can expose users to electrical current during normal use. These recalls are issued to prevent shock and electrocution injuries, and consumers are generally told to unplug and stop using the product.
Reported injuries at the time of the recall notice: None reported
What should you do?
If you think you may have bought Steelite Electric Pressure Washers, compare it against the product description and identifying codes before using it.
The official recall notice states: “Consumers should stop using the recalled pressure washers immediately and contact Longer 3D for a full refund. Consumers will be asked to destroy the power washer by cutting the unplugged power cord in half and send a photo of the destroyed pressure washer to 2991426091@qq.com. Consumers should then dispose of the destroyed recalled product.”
About this recall
This recall applies to products sold in the United States. RecallRadar summarizes recall information from public CPSC data to make it easier to understand. We are an independent service and are not affiliated with the CPSC or any government agency, so please always refer to the official source for the authoritative record — and note the “last synced” date shown on this page, since recall details can change over time.
Who this recall affects
This recall matters to anyone who bought Steelite Electric Pressure Washers. Even if you feel fine, it's worth checking what you have on hand rather than assuming you were missed.
What electric shock hazard actually means
An electric shock hazard means the product can expose users to electrical current during normal use. These recalls are issued to prevent shock and electrocution injuries, and consumers are generally told to unplug and stop using the product.
In this case, the concern applies specifically to Steelite Electric Pressure Washers from Longer Technology (Hong Kong) Limited, dba Longer 3D, of China — not to the wider category of products. Similar items from other brands aren't part of this recall.
How to check whether you have it
On most consumer products, the model and serial number appear on a rating label — usually on the underside, the back panel, inside a battery compartment, or on a sewn-in tag for textiles and children's products. Check the original box if you still have it.
Compare what you find against the product details listed above. If the codes don't match, your item isn't part of this recall.
What to do if you already bought it
Stop using the product now and keep it away from children and pets until it's dealt with.
Follow the remedy in the official notice — typically a free repair kit, replacement, or refund from Longer Technology (Hong Kong) Limited, dba Longer 3D, of China. You usually do not need a receipt.
Don't resell or donate a recalled product, and don't assume a second-hand version is safe — recalled items circulate for years on resale sites.
Full recall details
- Date reported
- August 27, 2026
- Recall started
- August 27, 2026
What you can do
Check whether any product you have matches the description and codes above. If it does, stop using it and follow the instructions in the official recall notice. When in doubt, contact the company or your local health authority.
Quick answers
Why was Steelite Electric Pressure Washers recalled?+
According to the CPSC: The recalled pressure washers lack an integral ground-fault circuit-interrupter (GFCI) and an ade…
How serious is this recall?+
Consumer product recall. An electric shock hazard means the product can expose users to electrical current during normal use. These recalls are issued to prevent shock and electrocution injuries, and consumers are generally told to unplug and stop using the product.
What should I do if I have Steelite Electric Pressure Washers?+
Compare your product against the description and identifying codes on this page. If it matches, stop using it and follow the instructions in the official recall notice — this usually means returning it for a refund or discarding it. When in doubt, contact the company or your local health authority.
Opens the U.S. Consumer Product Safety Commission (CPSC) data for this recall.
Recall number: CPSC-10956. Information last synced from the CPSC on September 3, 2026.